Home Frequently Asked Questions Are the Flexible Durso Standpipes really flexible?
PDF Print E-mail

Are the Flexible Durso Standpipes really flexible?

Saturday, 11 April 2009 02:06

The Flexible Durso Standpipes are made from flexible Schedule 40 PVC. This PVC has a slight give to it over some distance. Short distances such as 12 inches will not have much flex at all. Essentially the flexible PVC comes with a built in curve from how it was rolled and shipped which comes in handy for small overflow chambers.

The curve lets the Tee/Elbow assembly be off-center from the bulkhead. This curve is only helpful in tight spaces, it is of no help in larger overflow chambers as the standpipe will simply lean over to the side.

Flexible PVC is reported to be more flexible when heated.  This would include soaking in boiling water or heated with a hot air gun.  Typically you would not do this for a standpipe installation.  Tricks like this are more commonly used when flexible PVC is used for drain lines where tighter turns are required.

Last Updated on Friday, 24 April 2009 13:16
 
 
 

Testimonial:

C. Keller

Thanks a bunch for this website. I just put in new overflow boxes on both my tanks and they were VERY noisy. After seeing your design just now, I made my own for both of my boxes in about 20 minutes with leftover materials I had laying around!! They work great and the silence is wonderful!!!!

Sponsored Links

About Us

These are authentic Durso Standpipes that are fabricated by Richard Durso to your specifications.  If you have any questions please use the Contact Us.


We've shipped over 1,900 units!

 
 
Joomla 1.5 Templates by Joomlashack