DIN (Germany) Metric to Imperial (USA) PVC adapter for the Durso Standpipe. This should only be used with "slip" style Durso Standpipes. The "Spigot" side is 1 inch and inserts into the bottom of the Durso Standpipe the leaving a 32mm nominal (actual pipe outer diameter is 32mm) slip socket exposed.
It can also be used with 25mm JIS (Japan) pipe.
NOTE: This can not be added to a Durso Standpipe afterwards, it needs to be purchased with the Durso Standpipe as this replaced a part normally used.
If not used for a Durso Standpipe - The US side is 1.0 inch spigot meaning it'll glue into a standard 1.0 inch fitting, If you need to connect to 1.0 inch schedule 40/80 pipe you'll need a standard coupling to use this item.
|Diameter||1.5 inches (38mm)|
|Length||1 7/8 inches (53 mm)|
|Hole Size||The 1 inch spigot will insert into any standard 1 inch socket such as used on the bottom of a Durso Standpipe for 1 inch bulkhead. A 32mm metric pipe can then be inserted or this can insert into a 40mm socket/bulkhead.|
Metric Adapter, 32mm x 1 inch
- Product Code: MET-32
- Availability: In Stock